Online Support

BSP245 Incubator – Bio Static Performance 245L

The new generations of Bio Static Performance incubators have been designed for precision incubations of powdery products from room temperature + 5 ° C to + 65 ° C. This range of natural convection incubators is available in 3 volumes: 65, 125 and 245 litres.

  • 6 minutes of recovery time after 30 sec of door opening
  • 100 years of know-how

  • An interface intuitive: The range of Bio Static Performance incubators has an easy-to-use control for drying-sensitive incubation activities. Color display of the set and actual temperature in the incubator.
  • Protection and security: This range of incubators provides total safety for the operator, the environment and the product thanks to its class II overtemperature safety.
  • Maintenance fast and simple: With its national Service Team, Froilabo can respond quickly to all your requests for intervention and also offer you maintenance contracts.
– Net Volume: 242 L
– Ext Dimension (W x D x H) : 626 x 679.5 x 1230 mm
– Int Dimension (W x D x H): 500 x 494 x 980 mm
– Ext Construction: Electrogalvanised steel with epoxy paint
– Int Construction: Brushed stainless steel inner tank
– Net Weight: 79 Kg
– Standard Construction:
+ 1 fully closed door, easy hands-free closure / Safety glass inner doors for better insulation / 1 power cord (1.5m) / 4 levelling feet / 1probe passage (30mm) – left side
– Shelves (W x D) 480 x 430 mm : 2 anti-tilt stainless steel wire shelves as standard (max/shelf: 20 kg distributed). Maximum numbers of shelves : 18 (max total weight : 90 kg)
– Ambient Temperature: 18°C to 32°C
– Enviroment: Indoor use only, not designed for use in explosive atmospheres (ATEX)
– System: Heating convection ensured by fan (no risk of conduction or radiation)
– Ventilation: Turbine ventilation ensuring temperature homogeneity
– Air renewal: Adjustable on the front, rear exhaust
– Controller type: Self-adjusting and self-adaptive PID electronic regulation Programmable 8-segment controller
– Temperature probe: 1 x Pt100 3 wires probe
– Lists of alarm: High temperature / Overtemperature safety class II according to the European standard EN 61010-2-010 (DIN 3.1 equivalent)
– Type of alarm: Visual
– Energy consumption: 500 watt
– Power Supply: 110V 50/60 Hz, 230V 50Hz, 220V 60 Hz
– Temperature range: 0°C to 100°C (factory setting: +4°C to 100°C), display to 1/10° degree (setpoint and actual temperature)
– Temporal stabilitY: +/- 0.2°C
– Homogeneity at 37°C: +/- 0.5°C