Online Support

F-305 / F-308 / F-314 – Recirculating Chiller

The efficient way of cooling

The efficient way of cooling during evaporation, extraction or Kjeldahl comes courtesy of the Recirculating Chiller F-305 / F-308 / F-314. Combine with the Rotavapor® R-300 to gain more automation, more accuracy and more energy and time savings.

  • Cooling capacity at 10 °C:440 – 1150 W
  • Cooling range:-10 – +25 °C
  • Tank capacity:3 – 6.5 L


Achieve maximal distillation efficiency when you integrate the Recirculating Chiller F-305 / F-308 / F-314 with our rotary evaporation system. Save precious time thanks to an instant start with automatic and dynamic pressure adjustements, without you waiting for the chiller to reach its set temperature.


If you are trying to find the efficient way of cooling during rotary evaporation, look no further. The Recirculating Chiller F-305 / F-308 / F-314 eliminates water consumption and the ECO-mode saves you energy and reduces heat emissions simply by switching to stand-by-mode when not in use. In combination with Interface I-300 / I-300 Pro, you maximize your distillation capacity while reducing solvent emissions thanks to intelligent integration of all process parameters.


Adapt the chiller to your distillation needs through seamless plug & play integration with the Rotavapor® R-300 for a fully automated rotary evaporation solution and a complementary workflow between extraction and Kjeldahl for quicker, smoother and safer processes.

Recirculating Chiller F-314 Recirculating Chiller F-308 Recirculating Chiller F-305 Recirculating Chiller F-100 Recirculating Chiller F-105
Cooling capacity at 0 °C 720 W 450 W 250 W 120 W
Cooling capacity at 10 °C 1150 W 730 W 440 W 300 W 390 W
Cooling capacity at 15 °C 1400 W 900 W 550 W 530 W
Temperature range -10 to +25 °C -10 to +25 °C -10 to +25 °C fix at +10 °C -10 to +25 °C
Tank volume 6.5 l 4.5 l 3 l 3 l 3 l
Heating emission 2100 W 1400 W 750 W 700 W 700 W
Chiller height 670 mm 580 mm 400 mm 500 mm 500 mm
Chiller width 400 mm 400 mm 280 mm 280 mm 280 mm
Chiller depth 500 mm 500 mm 500 mm 420 mm 420 mm

Seamless integration

Convenient temperature setting and control when integrated in a Rotavapor® R-300 system.


The ECO-mode in conjunction with the interface saves energy and reduces heat emission by switching into a stand-by mode when not in use

Optimal cooling

Operating with a Rotavapor® R-300 system, the vacuum is automatically adjusted to the heating and cooling temperature, maximizing the distillation performance


Conveniently set the cooling temperature directly on the chiller or on the central Interface I-300 / I-300 Pro.

Reduce the envrionmental footprint of the process

The chiller consists of a circuit system with a closed loop so that the same coolant is used all the time to eliminate waste, improve sustainability and increase cost-efficiency.